你好,我用urat就是单纯的log输出,我阅读Zigbee的gateway的文档,步骤说明中是可以直接打开一个串口接口的,但是我的9518连接了PC没有相关的串口com。
具体文档名字和相关说明如下
Telink Zigbee Gateway Controller User Manual.pdf
3、Step 1: Open the port
1)
Select the port number, and other options can use the default value.
2)
Click the “open” button and open the port.
3)
When the port is opened, the tool sends a “get joined nodes” command automatically.