Port our code to a different Chipset

wx_1991426955

Hi,
  We want to port our code to a different Chipset (TLSR 8250 or 8253) 32 Pin from TLSR 8258 .
  We have made changes in the SDK so the BLE Part is functioning good (Onboarding and Controls are happening ) , but we cannot see any output on our changed GPIOs . Even Logs are not coming on our intended GPIO .
  Please help to share the mandatory changes which needs to e done in SDK to enable above said Chipset and use our required GPIOs (. We are only using PWM supported GPIOs for output)

TL_SHENGFENG

Are you using Telink dongle or your board. Change RAM_SIZE-MAX to 48k to see if the program works properly on the 8258 chip. If possible, you can directly burn the program with RAM_SIZE-MAX equal to 48k to the 8250 or 8253 chip to work properly