Sleep scan in adv mode

roli

I tested sleep mode and scan in adv mode. After sleep scan in adv mode does not work, what has to be initialized on wakeup?

call for sleep:
bls_pm_setSuspendMask (SUSPEND_ADV | DEEPSLEEP_RETENTION_ADV | SUSPEND_CONN | DEEPSLEEP_RETENTION_CONN);

Main:
_attribute_ram_code_ int main (void)    //must run in ramcode
{
    blc_pm_select_internal_32k_crystal();
    cpu_wakeup_init();
    int deepRetWakeUp = pm_is_MCU_deepRetentionWakeup();  //MCU deep retention wakeUp
    rf_drv_init(RF_MODE_BLE_1M);
    gpio_init( !deepRetWakeUp );  //analog resistance will keep available in deepSleep mode, so no need initialize again
#if (CLOCK_SYS_CLOCK_HZ == 16000000)
    clock_init(SYS_CLK_16M_Crystal);
#elif (CLOCK_SYS_CLOCK_HZ == 24000000)
    clock_init(SYS_CLK_24M_Crystal);
#endif
    blc_app_loadCustomizedParameters();
   
    init_i2c();
    if( deepRetWakeUp ){
        user_init_deepRetn ();
    }
    else{
        user_init_normal ();
    }   
    irq_enable();
    while (1) {
        main_loop ();
    }
}

Function called on wakeup:
_attribute_ram_code_ void user_init_deepRetn(void){//after sleep this will get executed
    init_lcd_deepsleep();
    blc_ll_initBasicMCU();
    rf_set_power_level_index (RF_POWER_P3p01dBm);
    blc_ll_recoverDeepRetention();
}

TL_SUNWEI

which SDK version you using?

roli

I use this one:
https://github.com/Ai-Thinker-Open/Telink_825X_SDK

TL_SUNWEI

This is a third-party SDK, and we cannot provide direct support because we are uncertain about the actual version they are using at the underlying level and whether they have modified certain configurations. We recommend you first communicate with Ai-Thinker.