标准的BLE设备能否通过proxy协议接入MESH网络?

Discussions on BLE related products, including standard BLE devices, BLE mesh, and Apple HomeKit products
Post Reply
yufeng
Posts: 7
Joined: Thu Aug 16, 2018 11:31 am

Thu Jun 11, 2020 11:14 am

各位大佬,mesh规范及网络上都说(非MESH的)BLE设备(比如BLE传感器、BLE灯)可以通过proxy协议接入MESH网络中,Telink的sig_mesh_sdk中实现没有?是如何实现的?有没有相关的文档?
Last edited by yufeng on Thu Jun 11, 2020 5:01 pm, edited 1 time in total.
QZB
Posts: 8
Joined: Tue Jun 09, 2020 5:32 pm

Thu Jun 11, 2020 2:03 pm

实现了,sdk中有个例子,就是用手机控制灯的状态,sdk的文档和官网的wiki中都有介绍
yufeng
Posts: 7
Joined: Thu Aug 16, 2018 11:31 am

Thu Jun 11, 2020 5:05 pm

谢谢,我想问的是智能家居中原有的BLE设备(比如灯、传感器)在BLE网关更换为BLE MESH网关后,能不能通过proxy接入MESH网络,不是手机哈
QZB
Posts: 8
Joined: Tue Jun 09, 2020 5:32 pm

Thu Jun 11, 2020 6:29 pm

应该可以吧,sig mesh的规范中定义了gatt承载,使得mesh节点可以和普通ble设备通信
yufeng
Posts: 7
Joined: Thu Aug 16, 2018 11:31 am

Fri Jun 12, 2020 9:19 am

从mesh规范来看是支持的,Telink的sig_mesh_sdk也已经实现了BLE手机APP(通过proxy协议)配置BLE mesh设备;但不确定Telink方案是否已经通过proxy协议实现配置传统的BLE设备(非手机,比如传感器、灯)进入MESH网络(通过代理节点)?FAE似乎不太清楚,因此在论坛里面咨询一下各位大佬,还望不吝赐教。
Post Reply